We are installing a charnwood country 4 stove replacing the existing open fire and surround.
The open fire has not been used for some time and an electric fire is being used.
The open fire has not been used for some time and an electric fire is being used.
After removing the carpet and laying down dust sheets we can start to remove the existing fire place and chimney breast.
The rubble is put into rubble sacks and carried out to the skip.
The existing flue way has nesting material completely blocking it, we have removed as much as possible from the top and begin to rod and brush from the bottom
This shows the nesting material that had built up.
With the flue way cleaned we can now install the new liner.
With the liner in position a quick clean up and carpets replaced we will return to fit the stove once the builder has been in to plaster the room and ceiling.
We returned after the builder had been in to plaster the walls, the customer has put one coat of paint on.
The slate hearth has been cut and layed.
The Country 4 stove has been placed in position and the flue pipe connected. Also the wall has been plastered between the wall and slate hearth. Skirting will be put up to the slate.
The complete flue and fire plate installation.
Graham Paints the flue with a mat finish high temperature stove and flue paint.
The finished installation burning beautifully with kiln dried wood.
Charnwood Country 4 wood and multifuel burning stove installation.
For more information about us and our services please visit our showroom at
Unit 3M, Pool Ind Park, Wilson Way, Pool, Redruth, TR15 3RX
Or call on:
Showroom: 01209 200887
Mobile: 07802357868
